ultra 16

ultra 18

ultra 20

ultra xl16

ultra xl18

ULTRA STONE SLINGER 16

 

Capacity Top of Steel: 15.35 cu/yd

 

Capacity Top of White Oak: 17.9 cu/yd

 

Net Weight: 9200 lbs. / 4182 kg

 

Under Body Apron Conveyor:

 26” wide pintle chain assembly

 330 PIW belting mechanically fastened to cross slats

 22” Effective belt exposure between skirting

 Engineered to carry full capacity in transit

 Variable speed hydraulic/planetary gear box drive

 

High Speed Boom Conveyor:

 14” x 19’ c/w 35° troughed idlers

 Endless hot vulcanized chevron belt

 Rubber-clad drive roll

 Variable speed (0-3700 ft/min) hydraulic motor drive

 Full hydraulic lift, swing and rotate

 Left or right conveyor parking for travel

 

Control Systems:

Full manual valve control from an elevated work station, with 3 function boom maneuverability at ground level.

Full manual valve control from an elevated work station, with full controls at ground level.

Hetronic™ BMSII Proportional Radio Remote Control of all functions including engine throttle.

 

Basic Body Dimension:

Body 8’ 6” x (16′, 18’ or 20’) x 6’-7 1?2” High plus 6” White Oak box extensions, plus 12” arched tarp system for an 8’-1 1?2”overall height on the chassis

 

Overall Length With Conveyor Parked on Fender: 20 ’ 6”

 

Recommended Chassis:

 Heavy construction chassis

 20,000 lb. front / 46,000 lb. rears

 Consult distributor and truck dealer for specifications and auxiliary axle requirements specific to your state or provincial regulations

 

Cab to Axle Requirement: 126” – 144”

Dependent on state or provincial regulations.

 

Pump / P.T.O.:

Tandem, Cast Iron, 3000 psi Bushing Bearing Gear Pump direct mount to air shift power take off.

 

Oil Cooler:

2 – High Efficiency, Light Weight, 12VDC, Thermostat-Controlled Dual Fan Air-Oil Heat Exchangers.

 

Super-Shield™:

 Standard Hydraulic “Power Drive”

 Optional Second Friction Drive

 

Standard Features:

 1/4” Grey HMW Polyliner

 Electronic Engine Throttle Control

 Hydraulic Vibrator

 Manually Operated Arched Mesh Tarp System

 Lighting

 Fenders

 Mud Flaps

 

Options:

 Dual Location Control (Manual Valves)

 12VDC Power Tarp Drive System

 18” Arched Tarp

 Vinyl Tarp vs. Mesh (12” or 18”)

 Aero 575 12VDC Powered Flip Mesh Tarp System

 Custom Color Paint (Non-Metallic)

 LED Lighting Package

 Pneumatic Swing-Out Platform (Radio Valves)

 

 

 

 

Ultra18 Stone Slinger

Capacity Top of Steel: 17 cu/yd

 

Capacity Top of White Oak: 19.9 cu/yd

 

Net Weight: 9500 lbs. / 4318 kg

 

 

Under Body Apron Conveyor:

 26” wide pintle chain assembly

 330 PIW belting mechanically fastened to cross slats

 22” Effective belt exposure between skirting

 Engineered to carry full capacity in transit

 Variable speed hydraulic/planetary gear box drive

 

High Speed Boom Conveyor:

 14” x 19’ c/w 35° troughed idlers

 Endless hot vulcanized chevron belt

 Rubber-clad drive roll

 Variable speed (0-3700 ft/min) hydraulic motor drive

 Full hydraulic lift, swing and rotate

 Left or right conveyor parking for travel

 

Control Systems:

Full manual valve control from an elevated work station, with 3 function boom maneuverability at ground level.

Full manual valve control from an elevated work station, with full controls at ground level.

Hetronic™ BMSII Proportional Radio Remote Control of all functions including engine throttle.

 

Basic Body Dimension:

Body 8’ 6” x (16′, 18’ or 20’) x 6’-7 1?2” High plus 6” White Oak box extensions, plus 12” arched tarp system for an 8’-1 1?2”overall height on the chassis

 

Overall Length With Conveyor Parked on Fender: 22’ 6”

 

Recommended Chassis:

 Heavy construction chassis

 20,000 lb. front / 46,000 lb. rears

 Consult distributor and truck dealer for specifications and auxiliary axle requirements specific to your state or provincial regulations

 

Cab to Axle Requirement: 156” – 188”

Dependent on state or provincial regulations.

 

Pump / P.T.O.:

Tandem, Cast Iron, 3000 psi Bushing Bearing Gear Pump direct mount to air shift power take off.

 

Oil Cooler:

2 – High Efficiency, Light Weight, 12VDC, Thermostat-Controlled Dual Fan Air-Oil Heat Exchangers.

 

Super-Shield™:

 Standard Hydraulic “Power Drive”

 Optional Second Friction Drive

 

Standard Features:

 1/4” Grey HMW Polyliner

 Electronic Engine Throttle Control

 Hydraulic Vibrator

 Manually Operated Arched Mesh Tarp System

 Lighting

 Fenders

 Mud Flaps

 

Options:

 Dual Location Control (Manual Valves)

 12VDC Power Tarp Drive System

 18” Arched Tarp

 Vinyl Tarp vs. Mesh (12” or 18”)

 Aero 575 12VDC Powered Flip Mesh Tarp System

 Custom Color Paint (Non-Metallic)

 LED Lighting Package

 Pneumatic Swing-Out Platform (Radio Valves)

 

 

Ultra20 Stone Slinger

Capacity Top of Steel: 18.75 cu/yd

 

Capacity Top of White Oak: 21.9 cu/yd

 

Net Weight: 9800 lbs. / 4445 kg

 

Under Body Apron Conveyor:

 26” wide pintle chain assembly

 330 PIW belting mechanically fastened to cross slats

 22” Effective belt exposure between skirting

 Engineered to carry full capacity in transit

 Variable speed hydraulic/planetary gear box drive

 

High Speed Boom Conveyor:

 14” x 19’ c/w 35° troughed idlers

 Endless hot vulcanized chevron belt

 Rubber-clad drive roll

 Variable speed (0-3700 ft/min) hydraulic motor drive

 Full hydraulic lift, swing and rotate

 Left or right conveyor parking for travel

 

Control Systems:

Full manual valve control from an elevated work station, with 3 function boom maneuverability at ground level.

Full manual valve control from an elevated work station, with full controls at ground level.

Hetronic™ BMSII Proportional Radio Remote Control of all functions including engine throttle.

 

Basic Body Dimension:

Body 8’ 6” x (16′, 18’ or 20’) x 6’-7 1?2” High plus 6” White Oak box extensions, plus 12” arched tarp system for an 8’-1 1?2”overall height on the chassis

 

Overall Length With Conveyor Parked on Fender: 24’ 6”

 

Recommended Chassis:

 Heavy construction chassis

 20,000 lb. front / 46,000 lb. rears

 Consult distributor and truck dealer for specifications and auxiliary axle requirements specific to your state or provincial regulations

 

Cab to Axle Requirement: 168” – 200”

Dependent on state or provincial regulations.

 

Pump / P.T.O.:

Tandem, Cast Iron, 3000 psi Bushing Bearing Gear Pump direct mount to air shift power take off.

 

Oil Cooler:

2 – High Efficiency, Light Weight, 12VDC, Thermostat-Controlled Dual Fan Air-Oil Heat Exchangers.

 

Super-Shield™:

 Standard Hydraulic “Power Drive”

 Optional Second Friction Drive

 

Standard Features:

 1/4” Grey HMW Polyliner

 Electronic Engine Throttle Control

 Hydraulic Vibrator

 Manually Operated Arched Mesh Tarp System

 Lighting

 Fenders

 Mud Flaps

 

Options:

 Dual Location Control (Manual Valves)

 12VDC Power Tarp Drive System

 18” Arched Tarp

 Vinyl Tarp vs. Mesh (12” or 18”)

 Aero 575 12VDC Powered Flip Mesh Tarp System

 Custom Color Paint (Non-Metallic)

 LED Lighting Package

 Pneumatic Swing-Out Platform (Radio Valves)

 

Ultra Stone Slinger XL16

Capacity Top of Steel: 15.5 cu/yd

 

Capacity Top of White Oak: 18.07 cu/yd

 

Net Weight: 9400 lbs. / 4273 kg

 

Under Body Apron Conveyor:

 26” wide pintle chain assembly

 330 PIW belting mechanically fastened to cross slats

 22” Effective belt exposure between skirting

 Engineered to carry full capacity in transit

 Variable speed hydraulic/planetary gear box drive

 

High Speed Boom Conveyor:

 14” x 19’ c/w 35° troughed idlers

 Endless hot vulcanized chevron belt

 Rubber-clad drive roll

 Variable speed (0-3700 ft/min) hydraulic motor drive

 Full hydraulic lift, swing and rotate

 Left or right conveyor parking for travel

 

Control Systems:

Full manual valve control from an elevated work station, with 3 function boom maneuverability at ground level.

Full manual valve control from an elevated work station, with full controls at ground level.

Hetronic™ BMSII Proportional Radio Remote Control of all functions including engine throttle.

 

Basic Body Dimension:

Body 8’ 6” x (16′, 18’ or 20’) x 6’-7 1?2” High plus 6” White Oak box extensions, plus 12” arched tarp system for an 8’-1 1?2”overall height on the chassis

 

Overall Length With Conveyor Parked on Fender: 24’ 6”

 

Recommended Chassis:

 Heavy construction chassis

 20,000 lb. front / 46,000 lb. rears

 Consult distributor and truck dealer for specifications and auxiliary axle requirements specific to your state or provincial regulations

 

Cab to Axle Requirement: 144” – 200″

Dependent on state or provincial regulations.

 

Pump / P.T.O.:

Tandem, Cast Iron, 3000 psi Bushing Bearing Gear Pump direct mount to air shift power take off.

 

Oil Cooler:

2 – High Efficiency, Light Weight, 12VDC, Thermostat-Controlled Dual Fan Air-Oil Heat Exchangers.

 

Super-Shield™:

 Standard Hydraulic “Power Drive”

 Optional Second Friction Drive

 

Standard Features:

 1/4” Grey HMW Polyliner

 Electronic Engine Throttle Control

 Hydraulic Vibrator

 Manually Operated Arched Mesh Tarp System

 Lighting

 Fenders

 Mud Flaps

 

Options:

 Dual Location Control (Manual Valves)

 12VDC Power Tarp Drive System

 18” Arched Tarp

 Vinyl Tarp vs. Mesh (12” or 18”)

 Aero 575 12VDC Powered Flip Mesh Tarp System

 Custom Color Paint (Non-Metallic)

 LED Lighting Package

 Pneumatic Swing-Out Platform (Radio Valves)

Ultra Stone Slinger XL18

Capacity Top of Steel: 17.15 cu/yd

 

Capacity Top of White Oak: 20.0 cu/yd

 

Net Weight: 9600 lbs. / 4364 kg

 

Under Body Apron Conveyor:

 26” wide pintle chain assembly

 330 PIW belting mechanically fastened to cross slats

 22” Effective belt exposure between skirting

 Engineered to carry full capacity in transit

 Variable speed hydraulic/planetary gear box drive

 

High Speed Boom Conveyor:

 14” x 19’ c/w 35° troughed idlers

 Endless hot vulcanized chevron belt

 Rubber-clad drive roll

 Variable speed (0-3700 ft/min) hydraulic motor drive

 Full hydraulic lift, swing and rotate

 Left or right conveyor parking for travel

 

Control Systems:

Full manual valve control from an elevated work station, with 3 function boom maneuverability at ground level.

Full manual valve control from an elevated work station, with full controls at ground level.

Hetronic™ BMSII Proportional Radio Remote Control of all functions including engine throttle.

 

Basic Body Dimension:

Body 8’ 6” x (16′, 18’ or 20’) x 6’-7 1?2” High plus 6” White Oak box extensions, plus 12” arched tarp system for an 8’-1 1?2”overall height on the chassis

 

Overall Length With Conveyor Parked on Fender: 24’ 6”

 

Recommended Chassis:

 Heavy construction chassis

 20,000 lb. front / 46,000 lb. rears

 Consult distributor and truck dealer for specifications and auxiliary axle requirements specific to your state or provincial regulations

 

Cab to Axle Requirement: 156” – 200”

Dependent on state or provincial regulations.

 

Pump / P.T.O.:

Tandem, Cast Iron, 3000 psi Bushing Bearing Gear Pump direct mount to air shift power take off.

 

Oil Cooler:

2 – High Efficiency, Light Weight, 12VDC, Thermostat-Controlled Dual Fan Air-Oil Heat Exchangers.

 

Super-Shield™:

 Standard Hydraulic “Power Drive”

 Optional Second Friction Drive

 

Standard Features:

 1/4” Grey HMW Polyliner

 Electronic Engine Throttle Control

 Hydraulic Vibrator

 Manually Operated Arched Mesh Tarp System

 Lighting

 Fenders

 Mud Flaps

 

Options:

 Dual Location Control (Manual Valves)

 12VDC Power Tarp Drive System

 18” Arched Tarp

 Vinyl Tarp vs. Mesh (12” or 18”)

 Aero 575 12VDC Powered Flip Mesh Tarp System

 Custom Color Paint (Non-Metallic)

 LED Lighting Package

 Pneumatic Swing-Out Platform (Radio Valves)

 

 

STONE SLINGER BODIES Safe, sure and durable, the Ultra Stone Slinger™ is custom built with the finest materials and components, exceeding the most exacting demands of the construction industry. Over the years the Stone Slinger™, by W.K. Dahms has earned a reputation for rugged reliability, backed by the industry’s best service support team. For precise, labor free placement of materials on a job site the ULTRA STONE SLINGER™ is now the construction industry’s preferred “precise placement” materials delivery system. Speak with our sales team about which unit best suits your needs based on your states application, weight, size, and access regulations.
STONE SLINGER BODIES Safe, sure and durable, the Ultra Stone Slinger™ is custom built with the finest materials and components, exceeding the most exacting demands of the construction industry. Over the years the Stone Slinger™, by W.K. Dahms has earned a reputation for rugged reliability, backed by the industry’s best service support team. For precise, labor free placement of materials on a job site the ULTRA STONE SLINGER™ is now the construction industry’s preferred “precise placement” materials delivery system. Speak with our sales team about which unit best suits your needs based on your states application, weight, size, and access regulations.
STONE SLINGER BODIES Safe, sure and durable, the Ultra Stone Slinger™ is custom built with the finest materials and components, exceeding the most exacting demands of the construction industry. Over the years the Stone Slinger™, by W.K. Dahms has earned a reputation for rugged reliability, backed by the industry’s best service support team. For precise, labor free placement of materials on a job site the ULTRA STONE SLINGER™ is now the construction industry’s preferred “precise placement” materials delivery system. Speak with our sales team about which unit best suits your needs based on your states application, weight, size, and access regulations.